|
Number of loops
|
1/2/3/4/5
|
|
Operating Voltage
|
230v 50Hz ac (+ 10%, -15% Voltage Tolerance
|
|
Max. Psu Rating :
Battery Charger
Internal& External Loads
|
3.25 Amps Total, Comprising:
1.0 Amps
2.25 Amps
|
|
Note
|
Remember to use loop and battery calculator to check system and battery loading.
|
|
Standby Batteries :
|
24v Sealed lead acid batteries
|
|
Minimum Capacity :
|
2X12v 12ah ( Internally Batteries )
|
|
Maximum Capacity :
|
2X12v 25ah ( Internally Batteries )
|
|
Power Supply :Input (s)
|
24v and 7Vac ( from integral mains transformer )
|
|
Output (s) :
|
24Vdc nominal ( 25.5 – 20.0Vdc )
|
|
Dimensions (mm)
|
500X500X195 (H x W x D )
|
|
Weight :
|
19.0Kg Without Batteries 38.2 Kg With 25Ah Batteries
|
|
Environmental Operating Limits : Temperature :
Humidity :
|
0’C to +40’C
85% non-condensing ( maximum )
|
|
Construction
|
Sheet Steel Painted, Sealed to LP30
|
|
Cable Entry :
|
24 x 20 mm Knock-outs In top of cabinet
24 x 20 mm Knock-outs In Bottom Of Cabinet
|
|
Loop Capacity
|
1 to 5 Loops Expandable
Apollo, Nittan and Hochiki Protocols :
Max. 126 devices ( detectors and modules) per loop
Morley-las and system sensor protocols :
Max.99 sensor and 99 module addresses per loop
|
|
Note :
|
Mulitiple Sensor Protocols Cannot be used in the panel Simultaneously.
|
|
Zones :
|
Up to 20 zones with individual LED indicators. Expandable
To 40 or 80 individual LED indicators. A maximum 200 can be programmed with up to 120 software zones with on LED indication.
|
|
Internal Sounder :
|
Intermittent buzzer ( fault condition ) High-Pitched Continuous buzzer ( fault condition )
|
|
External Output :
Sounder Output :
Auxiliary Relays :
|
4 Programmable Output and Short Circuit monitoring. 1a Maximum Per Out put.
En54 Format at 1 Fault Relay and 1 Programmable relay Voltage Free, Changeover Out puts Contacts rated at 24v ac/dc,1a,0.6 pf maximum.
|
|
User Controls :
|
Mute Accept, Silence/resound Alarms & reset
|
|
Programming Controls :
|
Alphanumeric multi-level keypad with 15 keys and 3
Control keys:
|
|
LED type general panel status indicators :
|
FIRE, FAULT, ACCEPTED, DISABLEMENT, TEST, SOUNDER FAULT, DELAYED MODE, RELAYS DISABLED, EARTH FAULT, SYSTEM / CPU FAULT,
SOUNDERS DISABLED, ALARMS SILENCED, SUPPLY FAULT, POWER.
|
